Let's talk about Sheetrock. You are looking to upgrade a room, finish a basement, or maybe even build an addition here in South Jordan, UT. That is a good idea. New Sheetrock can change a space a lot. Western Drywall Company has been doing this a long time. We have seen many projects go wrong because people did not know what to look for.
It is not always about hanging the Sheetrock. Sometimes the biggest mistakes happen before the first screw is put in. Here is what you really need to watch out for in South Jordan, UT.
Ignoring the Foundation: Bad Framing is a Bad Start for Drywall Installation
This is probably the most important thing, and it is often missed. You can have the best Drywall hangers in South Jordan, UT, but if the Framing behind the Sheetrock is not right, your walls will look bad. We are talking about wavy walls, bumps that you can see, and seams that will not disappear.
Western Drywall Company has seen this happen in newer homes around Daybreak, UT, and older homes too. Our clay soils here in the South Jordan valley can shift. Sometimes that means the Framing settles or moves. If your Studs are not plumb, level, and on the same plane, you are setting yourself up for problems with your Drywall Installation.
What to watch for with your Drywall Installation in South Jordan, UT:
- Wavy or crooked Studs: Before any Sheetrock goes up, look closely at the Framing. Use a long level or a string line. If it is not straight, talk to your contractor in South Jordan, UT.
- Irregular spacing: Studs should be spaced the same, usually 16 or 24 inches on center. If they are not spaced correctly, it makes hanging Sheetrock right almost impossible. This can also lead to weak spots in your walls.
- Missing Blocking: Every edge of a Sheetrock panel needs to be held up. If there is no wood Blocking behind a joint, that seam is going to crack later on.